Built for Reliable Everyday Performance
Screw Shank Nails
Our 120 wire coil nails provide dependable fastening performance for a wide range of wood construction applications. Designed for efficiency, durability, and reliability, they help support successful project outcomes.
USES: Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing.
DESCRIPTION: Hy-Tek nails are available in lengths from 2 to 5 inches (50.8 to 127 mm). The top third of the nail length has a smooth shank and the bottom two-thirds has a helical screw shank. Refer to Table 1 for Hy-Tek nail designations, diameters, and tip styles.
The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. The nails are available with a hot-dip galvanizing coating complying with ASTM A 153, Class D. Hy-Tek nails are supplied in strips, coils or in bulk.
Hy-Tek 2-1/4”x0.120M
Screw Shank Nail
See Details
Available in: Round Head 21◦ Strip Nail
Round Head 15◦ Wire Coil and Hi/Lo Coil
Finish: Bright
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 91
Withdrawal Strength 44
Penetration into Main Member 1-1/2”
Ideal For Shear, Subfloor and Roof Sheathing
Attaching 3/8″,1/2″,5/8 & 3/4″ Plywood
Replaces:
8d 2-1/2″x0.131 Smooth, Screw or Ring
10d 3″x0.148 Smooth, Screw or Ring
SIMPSON SUBFLLOR SCREWS WSNTL, WSV
PER EOR APPROVAL BEFORE INSTALLATION
Hy-Tek 2-1/4”x0.120M
Screw Shank Nail HDG
Item #: 120M22H
See Details
Available in: Round Head 21◦ Strip Nail
Round Head 15◦ Wire Coil and Hi/Lo Coil
Finish: Hot Dipped Galvanized
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 91
Withdrawal Strength 44
Penetration into Main Member 1-1/2”
Ideal For Shear, Subfloor and Roof Sheathing
Attaching 3/8″,1/2″,5/8 & 3/4″ Plywood
Replaces:
8d 2-1/2″x0.131 Smooth, Screw or Ring
10d 3″x0.148 Smooth, Screw or Ring
SIMPSON SUBFLLOR SCREWS WSNTL, WSV
PER EOR APPROVAL BEFORE INSTALLATION
Hy-Tek 2-1/4” x.120M
Screw Shank Nail
Item #: 120M22SC (Small Coil)
Item #: 120M22MC (Medium Coil)
Item #: 120M22LC (Large Coil)
See Details
Round Head 15◦ Wire Coil
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 91
Withdrawal Strength 44
Penetration into Main Member 1-1/2”
Ideal For Shear, Subfloor and Roof Sheathing
Attaching 3/8″,1/2″,5/8 & 3/4″ Plywood
Replaces:
8d 2-1/2″x.131 Smooth, Screw or Ring
10d 3″x.148 Smooth, Screw or Ring
SIMPSON SUBFLLOR SCREWS WSNTL, WSV
PER EOR APPROVAL BEFORE INSTALLATION
Hy-Tek 3”x0.120M
Screw Shank Nail
Item #: 120M30
See Details
Round Head 21◦ Strip Nail
Finish: Bright
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 131
Withdrawal Strength 44
Penetration into Main Member 1-1/4”
Ideal For 1-1/8″ Plywood & 2x Framing
Replaces:
10d 3″x0.131Smooth, Screw or Ring
16d 3-1/2″x0.135 Smooth, Screw or Ring
10d 3″x0.148 Smooth, Screw or Ring
16d 3-1/4”x0.148 Smooth, Screw or Ring
16d 3-1/2”x0.162 Smooth, Screw or Ring
2-Hy-Tek 3″x0.120 can Replace (1) 3-1/2”x0.162 Common For Load Purpose.
*Must be approved by the EOR and Must Be the Hy-Tek 3″x0.120
Hy-Tek 3”x0.120M
Screw Shank Nail HDG
Item #: 120M30H
See Details
Round Head 21◦ Strip Nail
Finish:Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 131
Withdrawal Strength 44
Penetration into Main Member 1-1/4”
Ideal For 1-1/8″ Plywood & 2x Framing
Replaces:
10d 3″x0.131Smooth, Screw or Ring
16d 3-1/2″x0.135 Smooth, Screw or Ring
10d 3″x0.148 Smooth, Screw or Ring
16d 3-1/4”x0.148 Smooth, Screw or Ring
16d 3-1/2”x0.162 Smooth, Screw or Ring
2-Hy-Tek 3″x0.120 can Replace (1) 3-1/2”x0.162 Common For Load Purpose.
*Must be approved by the EOR and Must Be the Hy-Tek 3″x0.120
Hy-Tek 3-1/2”x0.120M
Screw Shank Nail
Item #: 120M34
See Details
Round Head 21◦ Strip Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Table#2 Lateral Strength 131
Withdrawal Strength 44
Penetration into Main Member 1-1/4”
Replaces at Sole Plate
16d 3-1/2”x0.162 Smooth, Screw or Ring NDS Value 141
Reduce Value due to Penetration on 16d Common:
P=3.5 – 2.25= 1.25
D= 10 x.162 = 1.62
P/D =1.25/.162 = .77
141 x .77 = 108.7 lbs.
Hy-Tek 3-1/2”x0.120M
Screw Shank Nail HDG
Item #: 120M34H
See Details
Round Head 21◦ Strip Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Table#2 Lateral Strength 131
Withdrawal Strength 44
Penetration into Main Member 1-1/4”
Replaces at Sole Plate
16d 3-1/2”x0.162 Smooth, Screw or Ring NDS Value 141
Reduce Value due to Penetration on 16d Common:
P=3.5 – 2.25= 1.25
D= 10 x.162 = 1.62
P/D =1.25/.162 = .77
141 x .77 = 108.7 lbs.
Hy-Tek 3” x.120M
Screw Shank Nail
Item #: 120M30SC (Small Coil)
Item #: 120M30MC (Medium Coil)
Item #: 120M30LC (Large Coil)
Add H behind the C for HDG
See Details
Round Head 15◦ Coil Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 131
Withdrawal Strength 44
Penetration into Main Member 1-1/4”
Ideal For 1-1/8″ Plywood & 2x Framing
Replaces:
10d 3″ x0.131Smooth, Screw or Ring
16d 3-1/2″ x0.135 Smooth, Screw or Ring
10d 3″ x0.148 Smooth, Screw or Ring
16d 3-1/4” x0.148 Smooth, Screw or Ring
16d 3-1/2”x0.162 Smooth, Screw or Ring
2-Hy-Tek 3″x0.120 can Replace (1) 3-1/2”x0.162 Common For Load Purpose.
*Must be approved by the EOR and Must Be the Hy-Tek 3″x0.120
Need help selecting the right fastener for your project?
Contact Hy-Tek Fasteners today for expert recommendations and high-performance fastening solutions built to meet your exact requirements.