Built for Maximum Holding Power
High Strength Nails
Our 148 wire coil nails provide exceptional holding power and dependable performance for demanding wood construction applications. Designed for strength and reliability, they help support long-lasting project success.
USES: High strength nails are used to fasten steel side plate to lumber, wood and engineered wood materials.
DESCRIPTION: The 0.148-inch diameter high strength nail is a smooth shank nail with a diamond-shaped point at one end and a full round head at the other. The length of nail is 2 inches. It has 0.290-inch diameter head and a diamond tapered tip. The nail has either a polymer or vinyl coating and packaged in collated plastic strips or in bulk.
Hy-Tek 3”x0.148
Screw Shank Nail
Item #: 14830
See Details
Round Head 21◦ Strip Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 180
Withdrawal Strength 45
Penetration into Main Member 1-1/2”
Ideal For 2x to 2x Framing Only to
Replaces 16d 3-1/2″x0.162 Common
Hy-Tek 3”x0.148
Screw Shank Nail HDG
Item #: 14830H
See Details
Round Head 21◦ Strip Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 180
Withdrawal Strength 45
Penetration into Main Member 1-1/2”
Ideal For 2x to 2x Framing Only to
Replaces 16d 3-1/2″x0.162 Common
Hy-Tek 3-1/2”x.148
Screw Shank Nail
Item #: 14834 & 14834H
See Details
Round Head 21◦ Strip Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
LARR#25959
Lateral Strength 180
Withdrawal Strength 45
Penetration into Main Member 1-1/2”
Replaces 16d 3-1/2″x.162 Common
Replace Per EOR Approval Only
Replaces SDS 1/4”x3-1/2” Screw (2 Nails Per SDS Screw)
Hy-Tek 4”x0.148
Screw Shank Nail
Item #: 14840
See Details
Round Head 21◦ Strip Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 180
Withdrawal Strength 45
Penetration into Main Member 1-1/2”
Ideal For 3x Framing
Sole Plate Nailing 2x
Replaces 20d Commons 4”x0.192 Smooth
Lateral Strength 170
Withdrawal Strength 45
Hy-Tek 4”x0.148
Screw Shank Nail HDG
Item #: 14840H
See Details
Round Head 21◦ Strip Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667-95
ICC#ESR-2648
Lateral Strength 180
Withdrawal Strength 45
Penetration into Main Member 1-1/2”
Ideal For 3x Framing
Sole Plate Nailing 2x
Replaces 20d Commons 4”x0.192 Smooth
Lateral Strength 170
Withdrawal Strength 45
Hy-Tek 5”x0.148
Screw Shank Nail
Item #: 14850
See Details
Round Head 21◦ Strip Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667
ICC#ESR-2648
Lateral Strength 180
Withdrawal Strength 45
Penetration into Main Member 1-1/2”
Ideal For 3x, 4x Framing
Sole Plate Nailing with 2-2x or 3x
Replaces 20d Commons 5”x0.148 Smooth
Lateral Strength 141
Withdrawal Strength 45
Replaces 30d & 40d Commons
Hy-Tek 5″ x .148 Screw Shank Nail HDG
Item #: 14850H
See Details
Round Head 21◦ Strip Nail
Finish: Bright and Hot Dipped Galvanize
Meets ASTM A153 Class D
Meets ASTM F1667
ICC#ESR-2648
Lateral Strength 180
Withdrawal Strength 45
Penetration into Main Member 1-1/2”
Replaces 30d & 40d Commons
Ideal For 4x Framing
Sole Plate Nailing with 2-2x or 3x
2-Hy-Tek 5″x.148 can Replace 1/4″x6″ SDS Screw
*Must be approved by the EOR and Must Be the Hy-Tek 5″x.148
Need help selecting the right fastener for your project?
Contact Hy-Tek Fasteners today for expert recommendations and high-performance fastening solutions built to meet your exact requirements.